Skip to content

Order Status Display ​

What it does ​

The order status display is a screen that faces waiting customers. It lists every open order with its order number, the customer name and the current status, so customers can see when their order is ready.

Nobody needs to touch the screen during service. It updates on its own as the POS and the kitchen display move each order along.

Connect the display to a POS terminal ​

The display and the POS must be on the same Wi-Fi or wired network.

  1. On the POS, tap Settings, then tap Device.
  2. Note an address under Network addresses, for example 192.168.1.10.
  3. Note the number in Local socket port. It is 59590 unless someone changed it.
  4. On the order status display, tap the settings icon at the top right. The Manage Connections window opens.
  5. Under Add New Connection, enter the address in IP Address.
  6. Enter the port in Port.
  7. Tap Add Connection.
  8. Tap Close.

The connection appears in the list as 192.168.1.10:59590 and the display connects straight away.

INFO

🔒 Manager only - the Settings menu on the POS is only shown to staff who have permission to see it. See Device settings.

WARNING

The order status display is part of the venue's subscription plan. If the plan does not include it, the POS refuses the connection. See Messages you may see.

Connect to more than one POS terminal ​

Repeat the steps above for each POS terminal. The display lists the orders from every connected terminal together.

How an order moves across the screen ​

  1. The order is started at the POS

    The order appears on the display with the status PLACED.

  2. The order is sent to the kitchen

    The status changes to IN PROGRESS.

  3. The kitchen finishes every item

    The status changes to READY TO SERVE and the order moves to the top of the list.

  4. The order is handed over

    The order leaves the display.

What each status means ​

Each order is one row. The row shows the Order number, the Customer name and a status badge. The colour of the row follows the status.

Status on the screenColourWhat it tells the customerHow the order gets this status
PLACEDBlueThe order is taken. Cooking has not startedThe order is started at the POS
IN PROGRESSAmberThe kitchen is preparing the orderThe POS sends the order to the kitchen, or the kitchen ticks the first item on the kitchen display
READY TO SERVEGreenThe order is ready to collectThe kitchen ticks every item on the kitchen display, or staff tap Ready to Serve on the order in the POS Orders screen

Orders are listed in this sequence: READY TO SERVE first, then IN PROGRESS, then PLACED. A ready order also shows its number in larger text.

The customer name reads Guest when the order has no customer name.

When an order leaves the screen ​

An order is removed from the display when any of these happens:

What staff doWhere
Tap Picked / Served on the order cardKitchen display
Tap Sent out on a delivery order cardKitchen display
Tap Delivered/Served on the orderPOS Orders screen
Take full payment with Pay & Finish OrderPOS payment screen
Take full payment with Pay while Order status mode is offPOS payment screen

INFO

🔒 Manager only - to keep paid orders on the display until they are handed over, turn on Settings → General → Ordering → Order status mode. When it is off, an order is finished as soon as it is paid in full, and it leaves the display at that moment. See General settings.

When there are no orders ​

The display shows the Pratham logo with Welcome!, Enjoy your food! and Waiting for orders....

Check, refresh or remove a connection ​

  1. Tap the settings icon at the top right.
  2. Read the status badge beside each connection.
BadgeColourWhat it meansWhat to do
OPENGreenConnected and receiving ordersNothing
CONNECTINGAmberTrying to connectWait a few seconds
CLOSEDRedThe connection dropped. The display is trying againWait, or tap the refresh icon
ERRORRedThe display could not connect and has stopped tryingTap the refresh icon

Under each connection, Last sync shows when the display last heard from that POS. It reads Never until the first message arrives.

  • Tap the refresh icon on a connection to connect again.
  • Tap the delete icon on a connection to remove it.

WARNING

After a lost connection the display tries again 10 times, 5 seconds apart. After that it stops and the badge reads ERROR. Tap the refresh icon to start again.

Go fullscreen ​

Tap the fullscreen icon at the top right. Tap it again to leave fullscreen. The icon is not shown in the Android app.

On Windows the app starts with Windows and opens in fullscreen. When the computer has more than one screen, the app opens on the last screen.

Messages you may see ​

MessageWhat it means and what to do
Waiting for orders...No order is open. Orders appear as soon as they are started at the POS
No connections added yet.The display is not connected to any POS. See Connect the display to a POS terminal
IP address is required or Port is requiredFill in both fields before you tap Add Connection
Your current subscription plan does not include access to Order Status Display (ODS). Please upgrade your plan to use this feature.🔒 Manager only - the venue's plan does not include this display. The display disconnects. Contact Pratham to change the plan

FAQs ​

Why does an order disappear as soon as the customer pays?

Order status mode is turned off on the POS. The POS then finishes each order the moment it is paid in full, and a finished order leaves the display.

🔒 Manager only - turn on Settings → General → Ordering → Order status mode to keep paid orders on the display until they are handed over.

The kitchen has finished the order. Why does the display still show IN PROGRESS?

The status changes to READY TO SERVE only when every item on the order is ticked on the kitchen display. Check the card for an item that is still unticked.

Without a kitchen display, tap Ready to Serve on the order in the POS Orders screen.

Can customers see what is in each order?

No. The display shows the order number, the customer name and the status only. It does not show items or prices.

Can I change what the statuses are called on the screen?

Not on the display. It shows the status name it receives from the POS.

The display shows no orders but the POS has open orders. What do I check?
  1. Tap the settings icon and read the badge on each connection. It must read OPEN.
  2. Tap the refresh icon on any connection that reads CLOSED or ERROR.
  3. If it still does not connect, follow Display Connection Troubleshooting.

The display only receives changes that happen while it is connected. An order shows again the next time it changes at the POS.

Does the display need its own login?

No. It only needs the address and port of the POS terminal.

Pratham POS User Guide